NACHI Cojinetes De Bola De Contacto Angular

Contacta ahora

The raceways of both the inner and outer rings of this bearing type are made with a set contact angle.

Single-row Angular Contact ball bearings can sustain radial, axial or composite loads, however, any axial load must be in one direction.
Larger contact angle type has better axial load capability.
Small contact angle type has higher permissible speed capability. This bearing type is generally used in adjacent positions.

The raceways of both the inner and outer rings of this bearing type are made with a set contact angle.

These bearings are non-separable. Since the balls are inserted utilizing counter-bore construction, a larger number of balls can be installed than in the case of Deep Groove ball bearings.

Standard cage materials may be pressed steel, high- strength brass, or polyamide. Cage materials is dependant on the bearing series and or service condition. Single-row Angular Contact ball bearings can sustain radial, axial or composite loads, however, any axial load must be in one direction. This bearing type is generally used in pairs to handle the induced load resulting from the internal axial force generated by the applied radial load. When mounting two single bearings in adjacent positions, NACHI provides these combination parts (pairs) with preadjusted clearance. Paired combination bearings are matched sets. Combination or paired bearings can be arranged BACK-TO-BACK (DB), FACE-TO-FACE(DF), or in TANDEM (DT). DB or DF sets can sustain bidirectional axial loads.

50 mm x 90 mm x 30.2 mm NACHI 5210 Cojinetes De Bola De Contacto Angular

69 mm 2 mm
2 mm NNU4938-S-K-M-SP

45 mm x 100 mm x 25 mm NACHI 7309CDB Cojinetes De Bola De Contacto Angular

120 mm 360
170 45 mm x 100 mm x 25 mm

55 mm x 120 mm x 29 mm NACHI 7311DB Cojinetes De Bola De Contacto Angular

41,4 Steel
3,689 Kg Thrust Ball Bearings

95 mm x 170 mm x 32 mm NACHI 7219CDF Cojinetes De Bola De Contacto Angular

713618280 TOYOTA / Landcruise
CX241 VKBA 1905

17 mm x 40 mm x 12 mm NACHI 7203AC Cojinetes De Bola De Contacto Angular

399 mm 441,325
1,72 384,175

140 mm x 250 mm x 42 mm NACHI 7228DB Cojinetes De Bola De Contacto Angular

130,2 mm 15,4 kN
3 kN 19 mm

10 mm x 35 mm x 11 mm NACHI 7300CDT Cojinetes De Bola De Contacto Angular

45 mm 10 mm x 35 mm x 11 mm
31309J/CDF 100 mm

105 mm x 160 mm x 26 mm NACHI 7021DF Cojinetes De Bola De Contacto Angular

105 mm x 160 mm x 26 mm 47,625 mm
SIGMA 26,99

55 mm x 100 mm x 21 mm NACHI 7211 Cojinetes De Bola De Contacto Angular

220 2,5 mm
241 mm 220RJ91
1/22