NSK Rodamientos De Bolas Autoalineables

Contacta ahora

This type of ball bearing is recommended when alignment of the shaft and housing is difficult and the shaft may flex. The outer ring has a spherical raceway and its center of curvature coincides with that of the bearing; therefore, the axis of the inner ring, balls and cage can deflect to some extent around the bearing center. Pressed steel cages are usually used. Since the contact angle is small, the axial load capacity is low. The permissible dynamic misalignment is approximately 0.07 to 0.12 radian (4 to 7 degrees) under normal loads.

However, depending on the surrounding structure, such an angle may not be possible.

Self-Aligning Ball Bearings are ideal when the alignment of the shaft and housing is problematic and the shaft may bend. The outer ring has a spherical raceway with its center of curvature coinciding with the bearing. This allows the axis of the inner ring, balls and cage to deflect to some extent around the bearings center. The axial load capacity is low since the contact angle is small. Under normal loads, the permissible dynamic misalignment is approximately 0.07 to 0.12 radian (4 to 7 degrees).

Product Features and Benefits:

  • High quality steel - Ultra clean steel helps extend bearing life extended up to 80%
  • Pressed steel and polyamide cages available
  • Advanced Grease Technology - Lubricants that can extend grease life and performance
  • High grade balls - Smooth and quiet operation even at high speeds
  • Super Finished Raceways - Refined to minimize noise and improve lubricant life and distribution
  • Sealed versions are available

45 mm x 85 mm x 23 mm NSK 2209 K Rodamientos De Bolas Autoalineables

45 mm x 85 mm x 23 mm CX
4500 r/min 25,4 mm

110 mm x 240 mm x 50 mm NSK 1322 Rodamientos De Bolas Autoalineables

7.087 Inch | 180 Mil Angular Contact
Angular Contact Ball NTN

110 mm x 200 mm x 38 mm NSK 1222 K Rodamientos De Bolas Autoalineables

880 kN CX
8 Kg 240

70 mm x 125 mm x 24 mm NSK 1214 Rodamientos De Bolas Autoalineables

220,5 mm 70 mm x 125 mm x 24 mm
280 65 mm

60 mm x 130 mm x 31 mm NSK 1312 Rodamientos De Bolas Autoalineables

350000 N / Static lo Roller Assembly
Thrust Roller Bearin N/A

110 mm x 240 mm x 80 mm NSK 2322 Rodamientos De Bolas Autoalineables

NUP215 25
1.5 mm 130

10 mm x 35 mm x 17 mm NSK 2300 Rodamientos De Bolas Autoalineables

6311LUNR 55,000
29,000 mm 29,000 mm

25 mm x 62 mm x 24 mm NSK 2305 K Rodamientos De Bolas Autoalineables

40 80 mm
NTN AU0930-4LXL/L588

50 mm x 90 mm x 20 mm NSK 1210 K Rodamientos De Bolas Autoalineables

32 95 mm
95 170

6 mm x 19 mm x 6 mm NSK 126 Rodamientos De Bolas Autoalineables

603,25 2900 kN
590 mm 6 mm x 19 mm x 6 mm
1/14